Kenwood DPX501U Instruction Manual

Also see for DPX501U: Service manual

Contents

Kenwood DPX501U Instruction Manual Manual pdf 39 page image

38 | EnglishMenu systemOther than Standby modeB.M.S. (Bass Management System)Adjust the bass boost level of the externalamplifier using the main unit.Display Setting"AMP Bass : Flat"/ "BMS FLT"Bass boost level is flat."AMP Bass : +6"/"BMS +6"Bass boost level is low (+6dB)."AMP Bass : +12"/"BMS +12"Bass boost level is mid (+12dB)."AMP Bass : +18"/"BMS +18"Bass boost level is high (+18dB).• Refer to the catalog or instruction manual for poweramplifiers that can be controlled from this unit.• For amplifiers, there are the models you can set fromFlat to +18 dB, and the models you can set from Flatto +12 dB.When an amplifier that can only be set to +12 isconnected to the unit, "AMP Bass : +18"/ "BMS +18"will not work correctly even if it is selected.Other than Standby modeB.M.S. Frequency OffsetSetting the central frequency, boosted by B.M.S.Display Setting"AMP FREQ : Normal"/"BMSF NML"Boost with the normal central frequency."AMP FREQ : Low"/"BMSF LOW"Drop the normal central frequency 20%.When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to theunit.1 Select AMP Control modePush the Control knob towards [FM] or [AM].Select the "AMP Control"/ "AMP CTRL" display.2 Enter AMP Control modePress the Control knob for at least 1 second.3 Select the AMP Control item for adjustmentPush the Control knob towards [FM] or [AM].• For the details on the AMP Control item, see theInstruction manual attached to the LX AMP.4 Adjust the AMP Control itemPush the Control knob towards [4] or[¢].5 Exit AMP Control modePress the [MENU] button.• You cannot use the LX AMP operation during standbymode.