English | 25In Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.In Standby modeManual Clock Adjustment⁄• You can do this adjustment when the (page 25) is set as OFF.1 Select Clock Adjustment modePush the Control knob towards up or down.Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards up or down.Adjust the minutesPush the Control knob towards right or left.4 Exit Clock adjustment modePress the [MENU] button.In Standby modeSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC OFF" Adjust the time manually."SYNC ON" Synchronizes the time.⁄• It takes 3 to 4 minutes to synchronize the clock.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This function iseffective when you are driving at night.Display Setting"DISP ON" Keeps the display on."DISP OFF" Turns off the display when you perform nooperation for 5 seconds.⁄• Set the Display Illumination Control when the (page 29) is set to OFF.• When the display is off, pressing any key will turn on thedisplay.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Ejecting the disc• Turning off the power• USB remove mode• During function control, such as the Menu System, thedisplay stays on.In Standby modeDimmerDimming this unit’s display automatically when thevehicle light switch is turned ON.Display Setting"DIM AUTO" The display dims."DIM OFF" The display doesn’t dim.In Standby modeSwitching preoutAlternating the preout between the rear andsubwoofer. (With the subwoofer the sound outputswithout being effected by fader control.)Display Setting"SWPRE R" Rear preout."SWPRE SW" Subwoofer preout.
