Kenwood DPX502 Instruction Manual

Also see for DPX502 - DPX 502 Radio: Training guide Firmware update guide Service manual

Kenwood DPX502 Instruction Manual Manual pdf 26 page image

26 | EnglishMenu systemIn Standby modeBuilt-in Amp SettingControlling the built-in amplifier.Turning OFF this control enhances the preoutquality.Display Setting"AMP ON" The built-in amplifier activates."AMP OFF" The built-in amplifier deactivates.Other than Standby mode/When the Dual Zone System is ONDual Zone System SettingSetting the Front channel and Rear channel soundin the Dual Zone System.Display Setting"ZONE2 R" Sub source (Auxiliary input source) is to be rearchannel."ZONE2 F" Sub source (Auxiliary input source) is to be frontchannel.In Audio file sourceSupreme SettingWhen AAC, MP3 or WMA files encoded at a low bitrate (less than 96kbps (fs=44.1k, 48kHz)) are played,this function restores their high frequency regionto approach the sound quality of equivalents ofthese files encoded at a high bit rate. Processing isoptimized for the compression format used (AAC,MP3, or WMA), and adjustment is made for the bitrate used.Display Setting"SPRM ON" Plays sound using the Supreme function."SPRM OFF" Plays the original sound stored in the audio file.⁄• The sound effect may be imperceptible dependingon the relationship between the audio file format andsetting.• This function is not available on the iPod.Other than Standby modeTraffic InformationSwitching to traffic information automaticallywhen a traffic bulletin starts even when you aren’tlistening to the radio.Display Setting"TI OFF" The Traffic Information function is OFF."TI ON" The Traffic Information function is ON.When it is ON, the "TI" indicator is ON.When a traffic information station isn’t beingreceived the "TI" indicator blinks.When a traffic bulletin starts, "TRAFFIC" is displayedit and it switches to traffic information.⁄• During reception of an AM station when the TrafficInformation function is turned ON, it switches to an FMstation.• During reception of traffic information the adjustedvolume is automatically remembered, and the next timeit switches to traffic information it’s automatically theremembered volume.Receiving other traffic information stations (Intuner source)Push the Control knob towards [4] or [¢].⁄• You can change the traffic information station whenlistening to the radio.In FM receptionCRSC (Clean Reception System Circuit)Temporarily have reception alternate from stereo tomono to reduce multi-path noise when listening tothe FM station.Display Setting"CRSC ON" The CRSC is ON."CRSC OFF" The CRSC is OFF.⁄• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turned ON.In such a situation, turn it OFF.