Kenwood DV-503 Instruction Manual

Also see for DV-503: Instruction manual Service manual Service manual

Kenwood DV-503 Instruction Manual Manual pdf 15 page image

15OperationsDV-503/DVF-3550 (EN/K,P,T,M,X)TITLE TRACK CHAP HOUR MIN SECDVDC DVCDMP3A BPlayback of discBasic playPreparation÷ set the POWER ON/OFF switch to the ON ( )position.÷ After switching the power ON, there is a delay ofapprox. 3 seconds until the display is lit.POWERON OFFLoad a disc1MAIN UNIT01 Open the tray.2 Place a disc.3 Close the tray.POWER074¢1¡6Label side÷ When the key is pressed, the tray opens.When the key is pressed again, the tray closes. When thePLAY/PAUSE key is pressed while a tray is open, the traycloses automatically, and then playback begins.Start playback2MAIN UNIT REMOTE6TITLE No. (DVD)CHAPTER No. (DVD)TRACK No. (CD)Time displayTo stop playbackMAIN UNIT REMOTE7When a Disc Menu appears on the screenIn case of interactive DVDs, a Disc Menu appears on the screen.Then press ENTER to select specific menu you want to play by usingCursor keys.÷ Each press pauses and plays the disc alternately.RESUME playbackWhen a menu screen is recorded on thedisc, the menu screen will be displayedwhen the TOP MENU key is pressed. Atthe menu screen, the menu can be se-lected by pressing the Cursor keys.When the STOP key has been pressed once duringplayback to stop the playback, and then playback isstarted again, play will start from the point wherethe playback had been stopped. This is called theRESUME function. When the STOP key is pressedagain during stop, the RESUME function is can-celled.RESUME is cancelled when 5 minutes have passed inRESUME status.POWER07 6POWER ON/ OFF switch6 (PLAY/PAUSE) key7 (Stop) key7 (Stop) key0 (open/close) key6 (Play/Pause) keyTOP MENUkeyTOP MENU67