Kenwood DV-5700 Service Manual

Also see for DVF-R9050: User guide Service manual

Contents

Kenwood DV-5700 Service Manual Manual pdf 23 page image

DV-5700/DVF-R9050/R9050-S23MECHANISM DESCRIPTION1-4 Disassembling the Optical Pickup Unit1. Remove the 3 screws and the 3 spring holders.NoteBe sure not to lose the springs.2. Remove the guide shaft.NoteBe sure to adjust the optical pickup tilt after replacingthe optical pickup.(Refer to Optical Pickup Tilt Adjustment.)1-5 Disassembling the Traverse Unit1. Turn the motor pulley in the direction of the arrow inthe drawing (1) so that the traverse unit will reachthe lowest position (2).2.To release the stopper from the left slider, push itdownward (3).3. Pull the left slider frontward (4) to match the dent ofsliders to the protrusions of the traverse unit in thedirection of the arrow in the drawing (5,6).4. Remove the 2 screws and arms (7).5. Lift the traverse unit upward to pull it out (8).NoteDo not push stopper downward strongly because itcan be broken by excessive force.SPRING HOLDERSPRING HOLDERSPRING HOLDERGUIDE SHAFTSCREWSCREWPICKUP UNITSCREWDRIVE SHAFTPROTRUSIONPROTRUSION(Magnified View)(Magnified View)STOPPERMOTOR PULLEY3 56214ARMSTRAVERSE UNIT871-6 Disassembling the Middle Chassis1. Remove 4 push rivets (9) using a screw driver.2. Lift the traverse upward to pull it out (0).**PUSH RIVETMIDDLE CHASSIS9910x 4Fig. 4Fig. 5Fig. 8Fig. 7Fig. 6