Kenwood HD-7 Instruction Manual

Kenwood HD-7 Instruction Manual Manual pdf 23 page image

HD-7/EN23Basic1 Select the tuner input.2 Press the "ENTER" key for more than 2 sec-ondsCollective presetting of stations÷ A maximum of 40 stations of the band presentlybeing received will be preset.÷ When there are many stations and the intendedstation has not been preset, please also use"One-by-one presetting (Manual preset)".AUTO PRESET ........ For U.S.A. and CanadaAUTO MEMORY ..... For U.K. and EuropeRemote control unit onlyTUNER/BANDENTERReceiving broadcast stationThe space between radio channels has been set to the one that prevails in the area to which the system is shipped.However, if the current channel space setting does not match the setting in the area where the system is to beused, for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper recep-tion of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance withyour area by referring to the following table.Channel space setting1 Select the tuner input.2 Press the "stop 7" key for more than 2sec-onds.÷ At FM 50 kHz, the corresponding AM frequency is9 kHz.At FM 100 kHz, the corresponding AM frequencyis 10 kHz.Each press the "stop 7" key for more than 2 sec-onds switches the modes as follows.1 FM 50 k2 FM 100 kMain unit onlyCHANNELSpace FrequencyArea12USA, Canada and SouthAmerican countriesOther countriesFM: 100 kHzAM: 10 kHzFM: 50 kHzAM: 9 kHzFMAUTOMHzSTEREO LR30 10 5 3 1 0 (–dB)