Kenwood HM-383MD Instruction Manual

Kenwood HM-383MD Instruction Manual Manual pdf 34 page image

34Recording on MDBasic section1. Load a tape in deck.2. Select the tape transport direction.1 Press the play key.2 Press the play key again.3 Stop playback.To reverse the transport direction :÷ When recording is started, the tape is transported in the direction selectedin this step.Check the tape transport direction indicator. ™÷ Search the position you want to start recording in advance.1 Press the area marked 0 push open to open the cassetteholder.2 Insert a tape.3 Press the area marked 0 push open to close the cassetteholder.Start recording/ Pause the recordingStop the recordingStop the recordingRecording on TAPE1122÷ Remove tape slack before loading.1133Do not use a cassette with more than 90-minute recording time, for thetape used with such a cassette is very thin and tends to cause troublessuch as entanglement around the pinch roller or cutting of tape.2244550 push openTAPE2 3The tape deck of the unit can record signals only on Normal (Type ) and High (Type ) tapes. It cannot record onMetal (Type ) tapes.