Kenwood HM-636 Instruction Manual

Kenwood HM-636 Instruction Manual Manual pdf 20 page image

Playback of TAPE20 EN1. Select the tuner input.Each press of the TUNER/band key switches the band as follows.FMAMTuning to a non-preset radiostation (1) ™2. Preset a radio station in memory.One-by-one presetting (3) ™Collective presetting of stations ¡Follow the procedure in "Collective presetting of stations" to preset auto-matically the tunable radio stations in your area.3. Tuning (Preset Call)÷ If radio stations have al-ready been stored withauto presetting or manu-al presetting, select a sta-tion using the 4, ¢key. Each press of thesame key switches thepreset stations in se-quence.÷ When a key is held depressed, preset stations will be skipped at an inter-val of about 0.5 second.÷ To select a preset station from the remote, use the 4 P.CALL ¢ keyor numeric keys.The "TUNED" indicator lightswhen a station is receivedCollective presettingof stationsOne-by-one presetting (Manual preset) ™A station can also be tuned even when it is not preset. For details, read"Tuning to a non-preset radio station (Auto tuning, Manual tuning)".÷ Once the stations are stored by auto presetting, you are not required torepeat this procedure the next time you listen to radio. However whenyou shift to another location whereby the broadcast station frequenciesare different, you will have to re-execute the presetting of stations.When the TUNER/band key is pressed, the unit will automatically be switched on and reception status will be reached.When ¢ is pressed : 1=2=3 ... 28=29=30=1...When 4 is pressed : 30 = 29 = 28 ..... 3 = 2 = 1 = 30.....Receiving broadcast stationTuning to anon-presetradio station(2) ™Frequency displayOne-by-one preset-ting (2,4) ™