Kenwood HM-636 Instruction Manual

Kenwood HM-636 Instruction Manual Manual pdf 21 page image

Playback of TAPE21 ENReceiving broadcast station1 Select the tuner input.2 Select "AUTO MEMORY ?"(or "AUTO PRESET ?").Collective presetting of stations÷ A maximum of 30 stations of the band presently beingreceived will be preset.÷ When there are many stations and the intended sta-tion has not been preset, please also use "One-by-onepresetting (Manual preset)".AUTO MEMORY ..... For EuropeAUTO PRESET ........ For other countriesChannel space setting (Except for Europe and Australia)The space between radio channels has been set to the one that prevails in the area to which the system is shipped.However, if the current channel space setting does not match the setting in the area where the system is to be used,for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area byreferring to the following table.CHANNELSpace FrequencyArea12USA, Canada and SouthAmerican countriesOther countriesFM: 100 kHzAM: 10 kHzFM: 50 kHzAM: 9 kHz1 Turn power on.2 While holding TUNER/band key pressed,turn the volume knob to select "FM 50 k" or"FM 100 k".3 Set it.Each press switches the space frequency alter-nately.1 FM 50 k2 FM 100 k\\ \\÷ At FM 50 kHz, the corresponding AM frequency is 9 kHz.At FM 100 kHz, the corresponding AM frequency is 10 kHz.Main unit onlyMain unit only