Kenwood K-521 Instruction Manual

Also see for K-521: Instruction manual Instruction manual

Contents

Kenwood K-521 Instruction Manual Manual pdf 44 page image

44 K-521Playing from a digital audio playerYou can connect a Kenwood digital audio player (referred to hereafter simply as "digital audio player") tothe system and use it to play tracks.D.AUDIOConnect the digital audio player to the [D.AUDIO IN] termi-nal on the rear panel of the main unit.11Use this procedure to connect a digital audio player to the system and play tracks.Always turn this system and the digital audio player off before connecting the digitalzaudio player.Also refer to the instruction manual that comes with the digital audio player you arezconnection.Connecting the digital audio player using the dedicated cable PNC-150 allows you tozoperate the digital audio player using the main unit or the remote control.Compatible Kenwood digital audio players (Europe and Australia only)HDD audio player Memory audio playerHD20GA7 M1GC7, MGR-A7Turn on the digital audio player.22Press the [D.AUDIOE] key to begin playback.Simply pressing thez [D.AUDIOE] key turns on the system and begins play-back.If the digital audio player is not connected using the dedicated cable PNC-150,zuse the controls on the connected digital audio player.33SPEAKERS DIGITAL OUTDIGITAL IND.AUDIOINREC OUT PLAY INSUBWOOFERPRE OUTR LLRD.AUDIOINIf you use the dedicated cable for the connection, the volume and sound qualityzsettings on the digital audio player are disabled.When you have finished using the digital audio player, disconnect the player’szconnection cable from the [D.AUDIO IN] terminal.