69EnglishTroubleshootingWhenever the system is not operating as expected, check the following tables to see if you canresolve the problem yourself before requesting service.Symptoms Solution Ref. pageAmplifier/ SpeakersSymptoms Solution Ref. pageTunerNo sound output Check all connections as described in zSystem>.Increase the volume.zCancel the MUTE setting.zUnplug any headphones plugged into the main unit.z10-13202013[STANDBY/TIMER] indi-cator is flashing red andthere is no sound.One of the speaker cords is short-circuited. Unplug thezpower cord and then reconnect the speaker cord.There may be an internal problem. Turn off the power tozthe main unit, unplug the power cord and request repairs.—No sound from theheadphonesCheck that the headphone plug is inserted correctly.zIncrease the volume.zCancel the MUTE setting.z132020There is no sound from"D-IN".Check all connections as described in zSystem>.Check whether "PCM" is selected for the digital audiozoutput setting on the connected component.13No sound from one ofthe speakersCheck all connections as described in zSystem>.Check the volume balance for the left and right speakers.z1056The clock display isfl ashing.Set the clock as described in .z 64The timer does notwork.Set the clock as described in .zSet a start time and end time for the program timer.z6459No radio reception Connect the antennas.zSelect the broadcast band (AM or FM).zTune the radio to the frequency of the desired station.z103332-35Interference (noise) Install an outdoor antenna away from roads.zTurn off any electrical appliances that may be causingzinterference.Move the system away from the TV.z—I have used Auto Mem-ory and pressed the[P.CALL] key, but I stillcan't get radio recep-tion.Run Auto Memory again.zManually preset stations with frequencies that you canzreceive.3435
