Kenwood K20MSS10 Instruction Manual

Also see for K20MSS10: Instruction manual

Kenwood K20MSS10 Instruction Manual Manual pdf 10 page image

102. Choose a flat, stable work surface foryour microwave away from heat sourcessuch as radiators or fires and away fromcold areas. The surface should be at least85cm above the floor. Place the back ofthe microwave against a wall and allowa 20 cm space on both sides of the unitand 30 cm above so that warm air canescape from the vents during cooking. Thismicrowave is not designed to be built in. Donot block any intake or outlet openings asthis can damage the unit.getting readyThis microwave is designed for domestic use. It should not be used for commercial catering.1. After unpacking your microwave, check that it has not been damaged whilst in the box. Makesure there are no dents on the microwave, and the door closes properly. A dented or damagedmicrowave could allow microwave energy to escape. Make sure that you have taken all thepackaging from the inside of the microwave. Please dispose of the plastic wrappings or bagssafely and keep out of the reach of babies and young children.3. Plug your microwave into a standardhousehold electrical socket. Avoid usinga socket that also has an adapter andother equipment plugged in. Do not use amulti-adapter.4. Put the turntable support inside the microwaveand place the glass turntable plate on top ofthe support. The turntable support is shapedto sit securely on the spindle. You must alwaysuse the turntable plate and support wheneveryou use the microwave.30cm10cm10cm5. To protect your work surface, we recommendthat you fix some non-slip cushion pads (notincluded) to the underside of the microwave.Underside ViewRemove the turntable plate and turntablesupport before turning the microwaveupside down.