Kenwood KAC-8101D Instruction Manual

Also see for KAC-8101D: Instruction manual Instruction manual Service manual

Contents

6 EnglishConnection408 9 0 ! @^ &$ %#8 Fuse (40 A)If you can’t find the specified capacity fuse atyour store etc., consult your Kenwood dealer.9 Battery terminal0 Ground terminal! Power control terminalControls the unit ON/OFF.Controls the unit power. Be sure to connectit with all the systems.@ Speaker output terminalsAs this unit accepts speakers with aminimum impedance of 1 ohm, connectspeakers with 1-ohm or higher impedanceto these terminals.The rated input of the speakers should beno less than the maximum output of theamplifier. Otherwise malfunction mayresult.# RCA cable ground lead terminalWhen using an RCA cable with a groundlead attached, connect the ground lead tothis terminal.$ LINE IN terminal% LINE OUT terminalThe signal that’s input from the line inputterminal is output.^ REMOTE terminal (KAC-8151Donly)Connects the Remote cable.Use the Remote cable of the accessory.& Speaker level input terminals• The genuine-accessory car stereo shallhave a maximum power output of nomore than 40 W.• Do not connect the speaker output leadsfrom a power amplifier (Optional) to thespeaker level input terminals of this unit,for this may cause malfunction ordamage.• Do not connect cables and leads to bothRCA cable input jacks and the speakerlevel input terminals simultaneously, forthis may cause malfunction or damage.• Connect the power control lead to apower supply which can be turnedON/OFF by the ignition key switch (ACCline). With this connection, shock noisemay be generated when the power of thegenuine-accessory car stereo is switchedON/OFF.NOTENOTE2CAUTIONNOTENOTE■ Terminal names