Kenwood KAC-X11D Instruction Manual

Contents

English ■ Multi Amplifier with Remote cable connection■ Remote cable connectionCAUTION• Before connecting the remote controllercables, always turn the Bass boost level knoball the way to the left.You can control the Bass boost level of thesecond and subsequent Slave amplifierssimultaneously from the Master amplifier.The volume level of each amplifier isdetermined by the setting of the Masteramplifier (INPUT SENSITIVITY, boost level ofthe remote controller).Setting the Master amplifier1. Adjust the INPUT SENSIVITY to the outputof the center unit to be connected.2. Set the LPF frequency and ISF.3. Turn the LINE OUT FILTER switch ON.Setting the Slave amplifier1. Turn the LINE OUT FILTER switch OFF.2. Adjust the INPUT SENSIVITY.• To adjust the Slave amplifier to the samevolume as the Master amplifier, adjust theINPUT SENSIVITY to 0.2 V (max.).CAUTION• Before connecting the remote controllercables, always turn the Bass boost levelknob all the way to the left.* Commercially available partsRemote cable (6.0 m : 19.7 ft)Remote controllerP.CON SPEAKER OUTPUTREMOTEFUSE [30Ax3]GNDBATT.LINE IN LINE OUTLRP.CON SPEAKER OUTPUTREMOTEGNDBATT.LINE IN LINE OUTLRP.CON SPEAKER OUTPUTREMOTEGNDBATT.LINE IN LINE OUTLRP.CON SPEAKER OUTPUTREMOTEGNDBATT.LINE IN LINE OUTLRFUSE [30Ax3]FUSE [30Ax3]FUSE [30Ax3]INPUTSENSITIVITY[V]0.2 [MAX]0.30.51234[MIN] 5LINE OUTFILTERONOFFINPUTSENSITIVITY[V]0.2 [MAX]0.30.51234[MIN] 5LINE OUTFILTERONOFFINPUTSENSITIVITY[V]0.2 [MAX]0.30.51234[MIN] 5LINE OUTFILTERONOFFRemote cableRemote controllerCENTER UNIT(CD receiver, etc.)Master amplifierSlave amplifierSlave amplifierPower control wire*Extension wire*RCA cable*RCA cable*Use theattachedHexagonWrench.Hexagon Wrench(Small)

/ 8

Related manuals for Kenwood KAC-X11D