Function of the KDC-2018/KDC-1018Changing the Clock Display:Press the CLK button to switch the clock display on and off.The clock indicator lights while the clock is displayed.NOTEClock displayPress either the 4 or ¢ button to select the type ofspeaker. The setting switches as follows.Off ("SP OFF/ SP-F") / For the OEM speaker ("SP OEM/ SP-O")/ For 6/6x9 in. speaker ("SP 6/6x9/ SP-6") / For 5/4 in. speaker("SP 5/4/ SP-5")Press the Q button to end the mobile preset plan mode.When you change the setting of type of speaker, the bass,middle, and treble tone settings are returned to original levels.NOTE43This function allows you to adjust the setting that is recalledwith the System Q, according to types of speakers.Press the SRC button repeatedly to select the standby mode."ALL OFF/OFF" is displayed when the standby mode isselected.Press the Q button to enter the mobile preset plan mode.21Mobile PresetYou can recall the best audio setting preset for different typesof the music.Switching the Preset Sound Setting:Each time you press the Q button, the preset sound settingswitches as follows:As you proceed, each indicator would go on.The System Q function changes the values of the followingsound quality parameters:Bass center frequency, bass level, bass quality factor, bassextend, middle center frequency, middle level, middle qualityfactor, treble center frequency, and treble level.Note that some of these parameters cannot be controlled by theaudio control setting feature.Their setting values are different depending on the setting of themobile preset plan mode.NOTEFlat ("SQ-1") Easy ("SQ-6")Rock ("SQ-2") Jazz ("SQ-5")Pops ("SQ-4")Top 40 ("SQ-3")FlatEasyRockJazzPopsTop 40Scan of Flat, Rock – Easy(Default setting)User memory*Flat ("FLAT/SQ-1")Easy ("EASY/SQ-6")Rock ("ROCK/SQ-2")Jazz ("JAZZ/SQ-5")Pops ("POPS/SQ-4")Top 40 ("TOP 40/SQ-3")Scan of Flat – Easy ("SCAN/SCAn")(Default setting) Flat ("SQ-1") Easy ("SQ-6")Rock ("SQ-2") Jazz ("SQ-5")Pops ("SQ-4")Top 40 ("SQ-3")Scan of Flat – Easy ("SCAn")*User memory:The unit returns to the stateadjusted the last time withthe audio control setting feature.System Q— 9 —