Kenwood KDC-148 Instruction Manual

Also see for KDC-108: Brochure & specs Instruction manual

Contents

3ENGLISHPreparationHow to attach/detach the faceplate2112Do not expose the faceplate to directsunlight, excessive heat, or humidity. Alsoavoid places with too much dust or thepossibility of water splashing.Keep the faceplate in its casing whiledetached.The faceplate is a precision piece ofequipment and can be damaged by shocksor jolts.To prevent deterioration, do not touch theterminals of the unit and faceplate withyour fingers.How to reset your unitIf this unit fails to operate properly, press thereset button.The unit returns to factorysettings when the resetbutton is pressed.How to prepare the remotecontroller (RC-405)When you use the remote controller for thefirst time, pull out the insulation sheet.If the effectiveness of the remotecontroller decreases, replace the battery.2 341CALIFORNIA, USA ONLYThis perchlorate WARNING applies onlyto the product sold or distributed inCalifornia USA “Perchlorate Material–specialhandling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”Caution:Do not set the remote control in hot placessuch as on the dashboard.Lithium battery.Danger of explosion if the battery isincorrectly replaced. Replace only with thesame or equivalent type.The battery pack or batteries shall not beexposed to excessive heat such sunshine,fire or the like.Keep battery out of reach of children and inoriginal package until ready to use. Disposeof used batteries promptly. If swallowedcontact physician immediately.Insulation sheetRemote controller (RC-405) is equippedfor KDC-148/ KDC-MP148CR.Discs that cannot be usedDiscs that are not round.Discs with coloring on the recordingsurface or discs that are dirty.You cannot play a Recordable/ReWritabledisc that has not been finalized. (For thefinalization process refer to your discwriting software, and your disc recorderinstruction manual.)3-inch CD cannot be used. Attemptto insert using an adapter can causemalfunction.Reset button