7ENGLISHHold for about 2 seconds to memorize the current station.Press briefly to recall memorized station.1 Press SRC to select “TUNER.”2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM).3 Press 4 / ¢ to search for a station.Adjust [SETTINGS] mode settingsWhile listening to the radio...1 Press the volume knob to enter [FUNCTION] mode.2 Turn the volume knob to select [SETTINGS], then press to enter.3 Turn the volume knob to make a selection, then press to confirm.See table below for selection.4 Hold to finish the procedure.Item Selectable setting (Preset: *)SEEK MODE Selects the tuning mode for 4 / ¢ buttons.AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the presetmemory. ; MANUAL: Manually search for a station.AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automaticmemorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 6)MONO SET ON: Improves the FM reception (but the stereo effect may be lost). ; OFF *: Cancels (stereo effect resumes).Using the remote controller (RC-405)FM+ / AM– : Selects band.4 / ¢ ( + ) : Selects station.1 – 6 : Selects preset station.Listening to the radio