Kenwood KDC-2031SA/G Instruction Manual

Also see for KDC-2031SA: Service manual Service manual

Contents

Kenwood KDC-2031SA/G Instruction Manual Manual pdf 7 page image

English | 7System QYou can recall the best sound setting preset fordifferent types of music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.Each time the button is pressed, the soundsetting switches.Sound setting DisplayNatural "FLAT"Rock "ROCK"Pops "POPS"Easy "EASY"Top 40 "TP40"Jazz "JAzz"• "USER": The values set on the

7). When the Sysytem Q setting is changed,the Bass, Middle, and Treble set in audiocontrol replace the System Q values.• Each setting value is changed with the Setting> (page 8).First, select the speaker type with the Speaker setting.Audio Control1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [VOL] knob.3 Select the Audio item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4 Adjust the Audio itemTurn the [VOL] knob.Adjustment Item Display RangeBass level "BAS" –8 — +8Middle level "MID" –8 — +8Treble level "TRE" –8 — +8Balance "BL" Left 15 — Right 15Fader "FD" Rear 15 — Front 155 Exit Audio Control modePress any button.Press the button which is not [VOL] knob and[ATT] button.Audio SetupSetting the Sound system, such as Volume offsetand Loudness.1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Setup modePress the [VOL] knob for at least 1 second.3 Select the Audio Setup item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4 Adjust the Audio setup itemTurn the [VOL] knob.Adjustment Item Display RangeVolume offset "V-OF" –8 — ±0Loudness "LOUD" ON/OFF• Volume offset: Each source’s volume can be set as adifference from the basic volume.• Loudness: Compensating for low and high tonesduring low volume.When it's ON, "LOUD" indicator is ON.5 Exit Audio Setup modePress the [VOL] knob for at least 1 second.