Kenwood KDC-2031SA/G Instruction Manual

Also see for KDC-2031SA: Service manual Service manual

Contents

Kenwood KDC-2031SA/G Instruction Manual Manual pdf 8 page image

8 | EnglishGeneral featuresSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Select the "STBY" display.2 Enter Speaker Setting modePress the [VOL] knob.3 Select the Speaker typeTurn the [VOL] knob.Each time the knob is turned, the settingswitches as shown below.Speaker type DisplayOFF "SP-F"For 5 & 4 in. speaker "SP-5"For 6x9 & 6 in. speaker "SP-6"For the OEM speaker "SP-O"4 Exit Speaker Setting modePress the [VOL] knob.Clock DisplayPress the [CLK] button.Each time the button is pressed, the clock displayturns ON and OFF.Adjusting Clock1 Enter StandbyPress the [SRC] button.Select the "STBY" display.2 Select the clock displayPress the [CLK] button.3 Enter clock adjustment modePress the [CLK] button for at least 2 seconds.The clock display blinks.4 Adjust the hoursPush the Control knob to [FM] or [AM].Adjust the minutesPush the Control knob to [4] or [¢].5 Exit clock adjustment modePress the [CLK] button.Dimmer ControlYou can change the unit's display to dimmer.Press the [DIM] button for at least 1 second.Each time the button is pressed for 1 second, theDimmer contol turns ON and OFF.When it's ON, "on DI" is displayed.DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Set the DSIWhile pressing the [1] and [3] button, pressthe [SRC] button.Release your fingers from the button after thedisplay is appeared.Each time the step 1 and 2 operations are done,the DSI turns ON and OFF.Theft Deterrent FaceplateThe faceplate of the unit can be detached andtaken with you, helping to deter theft.Removing the FaceplatePress the Release button.The faceplate is unlocked, allowing you to detachit.• The faceplate is a precision piece of equipment andcan be damaged by shocks or jolts. For that reason,keep the faceplate in its special storage case whiledetached.• Do not expose the faceplate or its storage case todirect sunlight or excessive heat or humidity. Alsoavoid places with too much dust or the possibility ofwater splashing.