18 | EnglishIn Standby modeManual Clock Adjustment⁄• You can do this adjustment when the (page 18) is set as OFF.1 Select Clock Adjustment modePush the Control knob towards [FM] or [AM].Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or [¢].4 Exit Clock adjustment modePress the [MENU] button.In Standby modeSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.⁄• It takes 3 to 4 minutes to synchronize the clock.In Standby modeDSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.DimmerYou can lower the brightness of the display by usingthe dimmer function.Display Setting"DIM ON" The display dims."DIM OFF" The display doesn’t dim.News Bulletin with Timeout SettingThe tuner automatically changes when a newsbulletin starts even if the radio is not being listenedto. Also, you can set the time interval wheninterruption is prohibited.Display and Setting"NEWS OFF""NEWS 00M"…"NEWS 90M"When you set "NEWS 00M" — "NEWS 90M", theNews Bulletin Interrupt function is ON.When the News Bulletin is ON, the "NEWS"indicator is ON.When the news bulletin starts, "NEWS" is displayed,and the tuner changes to the news bulletin.⁄• If you choose the "20MIN" setting, further news bulletinswill not be received for 20 minutes once the first newsbulletin is received.• The news bulletin volume is the same level that was setfor (page 12).• This news bulletin function is only available if the desiredstation sends PTY-code for news bulletin or belongs to-Network sending PTY-codefor news bulletin.• When the News Bulletin Interrupt function is ON, thetuner changes to an FM station.Menu system
