Kenwood KDC-237 Instruction Manual

8 | EnglishSpeaker SettingFine-tuning so that the System Q value is optimalwhen setting the speaker type.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Speaker Setting modePress the [VOL] knob.3 Select the Speaker typeTurn the [VOL] knob.Each time you turn the knob, the setting alternatesbetween the settings shown in the table below.Speaker type DisplayOFF "SP OFF"For 5 & 4 in. speaker "SP 5/4"For 6 & 6x9 in. speaker "SP 6*9/6"For the OEM speaker "SP OEM"4 Exit Speaker Setting modePress the [VOL] knob.Switching DisplayChanging the information displayed.1 Enter Switching Display modePress the Control knob for at least 1 second."DISP SEL" is displayed.2 Select the Display itemPush the Control knob towards [4] or [¢].In Tuner sourceInformation DisplayFrequency (MW, LW) "FREQ"Program Service name (FM) "FREQ/PS"Clock "CLOCK"In CD sourceInformation DisplayPlay time & Track number "P-TIME"Clock "CLOCK"In Standby/ Auxiliary input sourceInformation DisplaySource name "SRC NAME"Clock "CLOCK"3 Exit Switching Display modePress the Control knob.Theft Deterrent FaceplateThe faceplate of the unit can be detached and takenwith you, helping to deter theft.Removing the FaceplatePress the Release button.The faceplate unlocks, allowing you to detach it.¤• The faceplate is a precision piece of equipment and canbe damaged by shocks or jolts.• Keep the faceplate in its faceplate case while detached.• Do not expose the faceplate (and the faceplate case) todirect sunlight or excessive heat or humidity. Also avoidplaces with too much dust or the possibility of watersplashing.Reattaching the Faceplate1 Align the projections on the unit with thegrooves on the faceplate.ProjectionsGrooves2 Push the faceplate in until it clicks.The faceplate is locked in place, allowing you to usethe unit.General features