Kenwood KDC-248U Instruction Manual

Also see for KDC-208U: Brochure & specs Instruction manual Installation manual Instruction manual Service manual

Contents

Kenwood KDC-248U Instruction Manual Manual pdf 13 page image

Function settings1 Press the volume knob to enter [FUNCTION] mode.2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter.3 Turn the volume knob to make a selection, then press to confirm.• See table below for selection.• Repeat step 3 until the desired item is selected/activated.• Press ~ to return to the previous item.4 Hold ~ to finish the procedure.[AUDIO CTRL] : While listening to any source except in STANDBY state ...~~=.,.,...."".-=-',."".,."=~".....,..",.,....,...,,.~==..,.........,,=~~?~fitj':'" " ":eli~t(~~:~<'$ !~g;~{~4i~~~:l~~~s;~~~~~tt~"':d-~~t~~~ii;i~;;¥j~,SUB-W LEVEL -15 - + 15 (Preset: 0): Adjusts the subwoofer out~u.t_l_ev_el_. _BASS BOOST B.BOOST LV1 */ B,BOOSI LV2~!~!~x~pre!erred bass boost leveL! OFF: Canc~_. __. _SYSTEM Q ~ATURAL */ USER/ ROCK/ POPS/ EASYI TOP40/ JAZZI GAME: Selects a preset sound mode suitable to themusic genre. (Selects [USER] to use the customized bass, middle, and treble settings.)BASS LEVEL -8 - +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making anMID LEVEL adjustment, select the source you want to adjust.)------TRE LEVELBALANCEFADERSUB-W SETDETAIL SETL15 - R15 (Preset: 0): Adjusts the left and right speaker output balance.R15 - F15 (Preset: 0): Adjusts the rear and front speaker output balance.ON*: Turns on the subwoofer output. ; OFF: Cancels.ILPF SUB-W: THROUGH*: All signals are sent to the subwoofer. ; 85HZ/120HZ/160HZ: Frequencies! higherthan 85 Hz/120 Hz/160 Hz are cut off,II SUB-W PHASE: REV (180°)/ NORM (00) *: Selects the phase angle of the subwoofer output to be in linewith the speaker output for optimum performance. (Selectable only if asetting other than[THROUGH] is selected for [LPF 5UB-W].)SUPREME SET: ON*: Creates realistic sound by interpolating the high-frequency components that are lost inMP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/WMAdisc or a USB device, except iPod.)-8 - +8 (for AUX) ; -8 - 0 (for other sources): Presets the volume adjustment level ofeach source. The volume level will automatically increase or decrease when you change thesource. (Before making an adjustment, sele~~the sourc~Jou ~ant t~ adjus.t.)IVOL OFFSET:(Preset: 0)______L• [SUB-W LEVEll SUB-W SETI LPF SUB-WI SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page 7)• [5UB-W LEVEll LPF SUB-W / SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON].[SETTINGS]AUX NAMECLOCKDISPLAYAUX*I DVDI PORTABLEI GAMEl VIDEOI TV: Selects the desired name for the connected component.(Selectable only if"AUX" is selected as the source.)CLOCK ADJ: (For details, see page 6.)DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels.TEXT SCROLL: AUTO*I ONCE: Selects to scroll the display information automatically, or scroll only once. ;OFF: Cancels.13