4GETTING STARTEDSet the initial settings1 Press SRC to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to make a selection (see the following table), then press the knob.4 Press and hold to exit.To return to the previous setting item or hierarchy, press .Default: XXAUDIO CONTROLSWITCHPREOUTREAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line outterminals on the rear (through an external amplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,6×9 inches or 6 inches) or OEM speakers for optimum performance.DISPLAYEASY MENU (For KDC-258U / KDC-MP258U )ON: Both display and button illumination change to white color when entering [FUNCTION]. ;OFF: Both display and button illumination remain as [COLOR SELECT] color. ( 11)TUNER SETTINGPRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ;MIX: Memorizes one station for each preset button, regardless of the selected band.SYSTEMKEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.SOURCE SELECTPANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8)IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9)BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8)CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as anmusic CD. No sound can be heard if an audio file disc is played.F/W UPDATEUPDATE SYSTEMF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/3Cancel the demonstrationWhen you turn on the power (or after you reset theunit), the display shows: “CANCEL DEMO” “PRESS”“VOLUME KNOB”1 Press the volume knob.[YES] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.3 Turn the volume knob to select [CLOCK ADJUST], then pressthe knob.4 Turn the volume knob to make the settings, then press the knob.Day Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then pressthe knob.6 Turn the volume knob to select [12H] or [24H], then pressthe knob.7 Press and hold to exit.(or)1 Press and hold DISP SCRL to enter clock adjustmentmode directly while in clock display screen.2 Turn the volume knob to make the settings, then press the knob.Day Hour MinuteTo return to the previous setting item or hierarchy, press .12