10 | EnglishGeneral featuresSwitching DisplaySwitching the information displayed.Press the [DISP] button.Each time the button is pressed the displayswitches as shown below.In Tuner sourceInformation DisplayStation name "SNPS"Frequency "BAND+F"ClockIn CD & External disc sourceInformation DisplayDisc title (In External disc source) "D-TITLE"Track title (In External disc source) "T-TITLE"Track number & Play time "P-TIME"Disc name "DNPS"ClockIn Auxiliary input sourceInformationAuxiliary input nameClock• If the Disc title or Track title is selected when the discwhich does not have Disc title or Track title is played,track number and play time are displayed.Station/Disc Naming (SNPS/DNPS)Attaching a title to a Station or CD.1 Receive/play the station/disc you want toattach a title to• A title can't be attached to an MD.• Refer to the 'Switching Display' (page 10) and selecteither "DNPS" or "SNPS".2 Enter name set modePress the [NAME.S] button for at least 2seconds."NAME SET" is displayed.3 Move the cursor to the enter characterpositionPress the [4] or [¢] button.4 Select the charactersPress the [FM] or [AM] button.• Characters can be entered by using a remote with anumber buttons.Example: If "DANCE" is entered.Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 25 Repeat steps 3 through 4 and enter the name.6 Exit name set modePress the [NAME.S] button.• When operation stops for 10 seconds the name atthat time is registered, and Name Set mode closes.• Memory numbers- FM: 28 stations- AM: 10 stations- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• The title of station/CD can be changed by the sameoperation used to name it.Auxiliary Input Display SettingSelecting the display when this device is switchedto Auxiliary input source.1 Select Auxiliary input sourcePress the [SRC] button.Select the "AUX1" display.2 Enter Auxiliary input display setting modePress the [DISP] button for at least 2 seconds.The presently selected AUX Name is blinks.3 Select the Auxiliary input displayPress the [4] or [¢] button.Each time the button is pressed it switchesthrough the below displays.• "AUX1"