Kenwood KDC-3025 Instruction Manual

Also see for KDC-3025: Service manual Service manual

18 | EnglishMenu systemIn Standby modeSecurity CodeBecause authorization by the Security Code isrequired when it's removed from the vehicle,personalizing this unit is by using the SecurityCode is a help in preventing theft.• When the Security Code function is activated, the codecan't be changed and the function can't be released.Note, the Security Code can be set as the 4 digit numberof your choice.1 Enter StandbyPress the [SRC] button.Select the "ALL OFF" display.2 Enter Menu modePress the [MENU] button for at least 1 second.When "MENU" is displayed, "SECURITY" isdisplayed.3 Enter Security Code modePress the [4] or [¢] button for at least 1second.When "ENTER" is displayed, "CODE" is displayed.4 Select the digits to enterPress the [4] or [¢] button.5 Select the Security Code numbersPress the [FM] or [AM] button.6 Repeat steps 4 and 5, and complete theSecurity Code.7 Confirm the Security CodePress the [¢] button for at least 3 seconds.When "RE-ENTER" is displayed, "CODE" isdisplayed.8 Do the step 4 through 7 operation, andreenter the Security Code."APPROVED" is displayed.The Security Code function activates.• When the wrong Code is entered in steps 4 through 6,repeat from step 4.Press the Reset button and when it's removedfrom the battery power source1 Turn the power ON.2 Do the step 4 through 7 operation, and enterthe Security Code."APPROVED" is displayed.The unit can be used.Touch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.Manual Clock Adjustment1 Select Clock Adjustment modePress the [FM] or [AM] button.Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the [4] or [¢] button for at least 1second.The clock display blinks.3 Adjust the hoursPress the [FM] or [AM] button.Adjust the minutesPress the [4] or [¢] button.4 Exit Clock adjustment modePress the [MENU] button.DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.