The messages shown below display yoursystems condition.EJECT: No disc magazine has been loaded inthe changer. The disc magazine is notcompletely loaded.➪ Load the disc magazine properly.No CD in the unit.➪ Insert the CD.NO DISC: No disc has been loaded in the discmagazine.➪ Load a disc into the disc magazine.TOC ERR: No disc has been loaded in the discmagazine.➪ Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.➪ Clean the CD and load it correctly.E-05: The CD is upside-down.➪ Load the CD correctly.BLANK: Nothing has been recorded on the MD.NO TRACK: No tracks are recorded on the MD,although it has a title.E-15: Media was played that doesn’t have datarecorded that the unit can play.➪ Use media that has data recorded thatthe unit can play.NO PANEL: The faceplate of the slave unit beingconnected to this unit has been removed.➪ Replace it.E-77: The unit is malfunctioning for some reason.➪ Press the reset button on the unit. If the"E-77" code does not disappear, consultyour nearest service center.E-99: Something is wrong with the discmagazine. Or the unit is malfunctioning forsome reason.➪ Check the disc magazine. And thenpress the reset button on the unit. If the"E-99" code does not disappear, consultyour nearest service center.HOLD: The protective circuit in the unit activateswhen the temperature inside theautomatic disc changer exceeds 60°C(140°F), stopping all operation.➪ Cool down the unit by openingthe windows or turning on the airconditioner. As the temperature fallsbelow 60°C (140°F), the disc will startplaying again.LOAD: Discs are being exchanged in the Discchanger.IN (Blink): The CD player section is not operatingproperly.➪ Reinsert the CD. If the CD cannot beejected or the display continues to flasheven when the CD has been properlyreinserted, please switch off the powerand consult your nearest service center.NA FILE: An Audio file is played with a format thatthis unit can’t support.➪ ----COPY PRO: A copy-protected file is played.➪ ----English | 35