Kenwood KDC-3028 Instruction Manual

Also see for KDC-3028: Instruction manual Service manual Service manual

English | 9System QYou can recall the best sound setting preset fordifferent types of music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.When the button is pressed once, the currentsound setting is displayed.Each time the button is pressed, the soundsetting switches.Sound setting DisplayNatural "NATURAL"User memory* "USER"Rock "ROCK"Pops "POPS"Easy "EASY"Top 40 "TOP40"Jazz "JAZZ"• * User memory: The values set on the Control> (page 9).KDC-3028/KDC-328 doesn't have the User memoryfunction so the values of Bass, Middle, and Treble setin audio control are replaced to the System Q valuesand "USER" is not be displayed when the System Qsetting is changed.• Each setting value is changed with the Setting> (page 10).First, select the speaker type with the Speaker setting.Audio Control1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [VOL] knob.3 Select the Audio item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4 Adjust the Audio itemTurn the [VOL] knob.Adjustment Item Display RangeSubwoofer level*1*2*3 "SW L" –15 — +15Bass level "BAS L" –8 — +8Middle level "MID L" –8 — +8Treble level "TRE L" –8 — +8Balance "BAL" Left 15 — Right 15Fader "FAD" Rear 15 — Front 15• *1 You can control this item when (page 22) is set to "SWPRE SW". (KDC-MP428 only)• *2 You can control this item when Output> (page 11) is set to "SW ON".• *3 Function of the KDC-MP4028/KDC-MP4285 Exit Audio Control modePress any button.Press the button which is not [VOL] knob and[ATT] button.