Kenwood KDC-452U Quick Start Manual

Also see for KDC-452U: Quick start guide

Contents

Kenwood KDC-452U Quick Start Manual Manual pdf 4 page image

4 | Quick Start GuidePreparationsExiting the Demonstration modeTurn off the Demonstration mode whenyou use the unit for the first time afterinstallation. (KDC-X896/ KDC-BT852HD/KDC-X496/ KDC-452U only)1 Press the Control knob to quit theDemonstration mode when the message“To cancel DEMO Press the volume knob”is displayed (approx. 15 seconds).2 Turn the Control knob and press itwhen “YES” is displayed.The Demonstration mode can also becanceled in the Function Setting mode.Refer to (page 36) in Instruction manualAdjusting the clock1 Press the [DISP] button several times todisplay the clock.2 Press and hold [DISP] button.3 Turn the Control knob to adjust thehour, and then press the Control knob.4 Turn the Control knob to adjust theminute, and then press the Controlknob.Control knob (Volume knob)Release[DISP]Detaching/ Reattaching thefaceplatePress the Releasebutton.¤• Remove the faceplate at once afterpressing the Release button; otherwise itcan fall down due to vibration.• The faceplate is a precision component ofthe unit and can be damaged by shocksor jolts.• Keep the faceplate in its case whiledetached.• Do not place the faceplate (and case) inareas exposed to direct sunlight, excessiveheat or humidity. Also avoid places withtoo much dust or the possibility of watersplashing.