The faceplate of the unit can be detached and taken with you,helping to deter theft.Removing Faceplate:Press the Release button.The faceplate is unlocked, allowing you to detach it.• The faceplate is a precision piece of equipment and can bedamaged by shocks or jolts. For that reason, keep the faceplatein its special storage case whilst detached.NOTEProjectionsGroovesRelease buttonTheft Deterrent FaceplatePress the AUD button to end the control mode.Determining the parameters in the audio control setting will clearall the adjustments made in the System Q and they are replacedwith the values made in the audio control setting.NOTE4Adjustmentmode(Display)Bass ("BAS")Treble("TRE")Balance("BAL")Fader ("FAD")Bass decreased.Treble decreased.Bass increased.Treble increased.Middle("MID") Middle decreased. Middle increased.4 button ¢ buttonOperation of Audio control buttonFront channel increased.Rear channel increased.Right channel emphasized.Left channel emphasized.Adjust various parameters of sound quality.Hold down the AUD button for one second or more to enterthe control mode.Selecting modePress either the FM or AM button.Each time the button is pressed, the adjustment mode willchange as follows:Pressing the FM button advances the display, and pressing theAM button reverses it.Source tone memoryEach source (CD, MD, FM, AM and disc changer) has its ownmemory in which to store the bass, middle and treble tonesettings.The settings made for a particular source are then recalledautomatically whenever you use that source (e.g., FM mode usesthe tone settings made for FM, AM for AM, etc.).Adjust each modePress the 4/¢ button.Look at the table to adjust the mode being displayed.3NOTEBassTrebleMiddle BalanceFader21Audio Control SettingGeneral features— 10 —English