Kenwood KDC-4757SD Instruction Manual

Contents

13ENGLISH |R LREAR/SWKDC-3657SDREMOTE CONTSTEERING WHEELREMOTE INPUTMUTEP. CONTANT CONTKDC-4757SDSW FRONT R LREARWiring connection Part list for installationFuse (10 A)Antenna terminal( ×2 )( ×1 )( ×1 )( ×1 )( ×1 )A FaceplateB Mounting sleeveC Trim plateD Wiring harnessE Extraction keyLight blue/yellow(Steering remote control wire) To the steering wheel remote control adapterBlue/White(Power control wire/ Antenna control wire)Brown(Mute control wire)To the power control terminal when using the optional power amplifier, or to the antennacontrol terminal in the vehicle.To the terminal that is grounded when either the telephone rings or during conversation.(To connect the Kenwood navigation system, consult your navigation manual.)Yellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)Pin Color and functionA4 Yellow : BatteryA5 Blue/White : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 / B2 Purple ª / Purple/black · : Rear speaker (right)B3 / B4 Gray ª / Gray/black · : Front speaker (right)B5 / B6 White ª / White/black · : Front speaker (left)B7 / B8 Green ª / Green/black · : Rear speaker (left)ISO connectorsConnecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobilesYou may need to modify the wiring of thesupplied wiring harness as illustrated below.Unit VehicleA7 (Red)Ignition wire(Red)A4 (Yellow)Default wiringBattery wire(Yellow)If no connections are made, do not let the wire come out from the tab.Rear/subwoofer outputRear outputFront outputSubwoofer output

/ 15

Related manuals for Kenwood KDC-3657SD