The faceplate of the unit can be detached and taken with you,helping to deter theft.Removing the Faceplate1 Turn the ignition OFF or press the [SRC] button for at least 1second.The power turns OFF and the faceplate slides open.2 Holding the center part of the faceplate pull it out.• When the faceplate is kept remove open, according to the Wait Time Setting> (page 20) setting, the faceplate is hidden andthe power turns OFF.• The faceplate is a precision piece of equipment and can bedamaged by shocks or jolts. For that reason, keep the faceplate inits special storage case while detached.• Do not expose the faceplate or its storage case to direct sunlightor excessive heat or humidity. Also avoid places with too muchdust or the possibility of water splashing.Reattaching the Faceplate1 Set the left side of the faceplate in the faceplate bracket.2 Press the right side of the faceplate until it locks.Theft Deterrent FaceplatePress the [ANG] button for at least 1 second.Do not apply excessive force to the faceplate. It can cause damage.Faceplate Angle AdjustmentThe presently selected AUX Name is displayed.3 Select the Auxiliary input displayPress the [4] or [¢] button.Each time the button is pressed it switches through the belowdisplays.• "AUX"• "TV"• "VCP"• "GAME"• "PORTABLE"4 Exit Auxiliary input display setting modePress the [DISP] button.When operation stops for 10 seconds, the name at that time isselected, and Auxiliary input display setting mode closes.— 11 —