Kenwood KDC-5019 Instruction Manual

Also see for KDC-5019: Service manual Instruction manual Instruction manual

— 29 —If the following situations, consult your nearest servicecenter:• Even though the disc changer is connected, the Disc Changer source isnot ON, with "AUX" showing in the display during the Changer Mode.• Even though no device (KCA-S210A, CA-C1AX, KDC-CPS87, KDC-CX87,KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, theAuxiliary input is entered when switching modes.The messages shown below display your systemscondition.Eject: No disc magazine has been loaded in the changer.The disc magazine is not completely loaded.E01➪ Load the disc magazine properly.No CD in the unit.➪ Insert the CD.No Disc: No disc has been loaded in the disc magazine.E02➪ Load a disc into the disc magazine.TOC Error: No disc has been loaded in the disc magazine.E04➪ Load a disc into the disc magazine.The CD is quite dirty. The CD is upside-down. The CDis scratched a lot.➪ Clean the CD and load it correctly.Blank DISC: Nothing has been recorded on the MD.E10No Tr DISC: No tracks are recorded on the MD, although it has atitle.E11NO PANEL: The faceplate of the slave unit being connected tothis unit has been removed.E30➪ Replace it.E-77: The unit is malfunctioning for some reason.E77➪ Press the reset button on the unit. If the "E-77"code does not disappear, consult your nearestservice center.Mecha Error: Something is wrong with the disc magazine. Or theunit is malfunctioning for some reason.E99➪ Check the disc magazine. And then press the resetbutton on the unit. If the "Mecha Error" code doesnot disappear, consult your nearest service center.Hold Error: The protective circuit in the unit activates when thetemperature inside the automatic disc changerexceeds 60°C (140°F), stopping all operation.E0d➪ Cool down the unit by opening the windows orturning on the air conditioner. As the temperaturefalls below 60°C (140°F), the disc will start playingagain.NO NAME: Attempted to display DNPS during the CD play havingno disc names preset.E51NO TITLE: Attempted to display the disc title or track title whilethe MD having no MD title is being played.E53NO TEXT: • Attempted to display the disc text or track textwhile the CD having no CD text is being played.E54• Attempted to display text during reception of thestation that isn't sending text data.E55Load: Discs are being exchanged in the Disc changer.E57NO ACCESS: After setting it in the Disc Changer, DNPP was donewithout having it been played at least 1 time.E58IN (Blink): The CD player section is not operating properly.E59

/ 30

Related manuals for Kenwood KDC-5019