Kenwood KDC-5070R Instruction Manual

Contents

Kenwood KDC-5070R Instruction Manual Manual pdf 29 page image

A red indicator blinks on the unit after the faceplate is removed,warning potential thieves. The factory default for this functionis "ON".Turning Disabled System Indicator On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Disabled SystemIndicator function appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "DSI ON" or "DSI OFF" in thedisplay, indicating that the disable system indicator is on or off,respectively.Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.4321Disabled System Indicator (DSI)4 button to make the minutes go back.Press the MENU button to end the menu mode.6Tune into an RDS station for 3 or 4 minutes.The time adjusts automatically to the correct local time.The time is not adjusted when the RDS station you are tuned to isnot transmitting a time signal. Choose another RDS station insuch a case.Turning Automatic Time Adjustment On/Off:Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the Automatic TimeAdjustment function appears in the display.Press the 4 button to search in the other direction.The function setting is indicated by "SYNC ON" or "SYNC OFF"in the display, indicating that the Automatic Time Adjustment ison or off, respectively."SYNC ON" (Automatic time adjustment)"SYNC OFF" (Manual time adjustment)Switching settingsPress either the AM button or FM button.The display and setting will change.Press the MENU button to end the menu mode.Adjusting Time Manually:Turn off the Automatic Time Adjustment as mentioned above.Hold down the MENU button for one second or more."MENU" is displayed and the menu mode is turned on.Press the ¢ button repeatedly until the "CLK ADJ" appears inthe display.Press the 4 button to search in the other direction.Hold down either the AM or FM button for two seconds ormore to enter the Time Adjustment mode.The hour display will blink.• Adjusting the hoursPress the FM button to advance the hours, or press the AMbutton to make the hours go back.• Adjusting the minutesPress the ¢ button to advance the minutes, or press the543214321NOTE— 29 —