Kenwood KDC-5070R Instruction Manual

Contents

Kenwood KDC-5070R Instruction Manual Manual pdf 32 page image

English— 32 —Connecting Cables to Terminals1234567812345678P.CONTANT.CTEL MUTEConnector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left (+)Rear Left (–)KENWOOD disc changer/ DAB control inputBattery cable (Yellow)Ignition cable (Red)FM/AM antenna inputAntenna Cord (ISO)Antenna Conversion Adaptor (ISO–JASO) (Accessory3)To connect the Discchanger or DAB unit,consult each manual.NOTETo connect the KENWOODnavigation system, consultyour navigation manual.NOTEWiring harness(Accessory1)If no connections are made,do not let the cable comeout from the tab.Power control/ Motorantenna controlcable (Blue/White)TEL mute cable (Brown)Connect either to the powercontrol terminal when using theoptional power amplifier, or tothe antenna control terminal inthe vehicle.Connect to the terminal that isgrounded when either thetelephone rings or duringconversation.A–7 Pin (Red)A–4 Pin (Yellow)Connector AConnector BFuse (10A)Rear left output(White)Front leftoutput (White)Front rightoutput (Red)Rear rightoutput (Red)