Kenwood KDC-6080R/RV Instruction Manual

• You can give names to discs through the presetting disc namefunction (see p. 22).Note that depending on the unit, display may not be possible.• If you try to display the name of a disc that does not have one,"NO NAME" is displayed instead.• When there is an attempt to display the title of a disc for whichthe disc title/track title has not been recorded, "NO TEXT" isdisplayed for CD and "NO TITLE/NO NAME" is displayed forMD.• Depending on the type of characters of the CD Text, somecharacters may not be displayable.• The £ indicator lights whilst the clock is displayed.NOTETrack timeClockDisc name (DNPS)Disc title (Units featuring CD text/MD only)Track title (Units featuring CD text/MD only)DateSwitch the display that appears whilst discs are playing.Switching Display for Discs:Each time you press the DISP button, the display during discplay switches as follows.Switching Display for DiscsThis function permits the connection of optional players andthe playing of discs other than the loaded CD (in the currentunit).Playing Discs:Press the SRC button repeatedly to select the external disccontrol mode.The disc will start playing.The external disc control mode will differ, depending on the unitthat is connected.Mode Display Examples• "CD2" ...when a CD player is connected• "DISC" ...when a disc changer is connected• "DISC-1" , "DISC-2" ...when two disc changers are connectedPausing and Restarting Disc Play:Press the 38 button to make the disc pause.Press the same button again to start play again.• When one disc has finished playing its last track, the next discin the changer starts playing. When the last disc in the changerhas finished, the player returns to the first disc and startsplaying it.• Disc #10 is displayed as "0".NOTENOTEPlaying Other Disc mode— 19 —