TEL MUTEP.CONTANT.CONT.1234567812345678FRONTREAREnglish— 34 —Connecting Cables to TerminalsFront left output (White)Front right output (Red)Rear right output (Red)Rear left output (White)Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6(KDC-6080R/RV only)A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left ( +)Rear Left ( –)KENWOOD disc changer/DAB control input/Battery cable (Yellow)Ignition cable (Red)FM/AMantenna inputAntenna Cord (ISO)Antenna Conversion Adaptor (ISO–JASO) (Accessory3)To connect the Disc changer or DAB unit,consult each manual.NOTEWiring harness(Accessory1)If no connections aremade, do not let the cablecome out from the tab.NOTEConnect to the terminal that isgrounded when either the telephonerings or during conversation.Power control/ Motor antennacontrol cable (Blue/White)Connect either to the power controlterminal when using the optionalpower amplifier, or to the antennacontrol terminal in the vehicle.A–7 Pin (Red)A–4 Pin (Yellow)Connector BFuse(10A)Connector ATEL mute cable (Brown)To connect the KENWOOD navigationsystem, consult your navigation manual.NOTEDisplay Data Output JackOutputs data representing the unit's current state,causing it to appear in the external display.To connect to this jack, a converting adapter(optional) is necessary.