Switching the information displayed in Standby.1 Enter StandbyPress the [SRC] button.Select the "ALL OFF" display.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Display Control modePress the [FM] or [AM] button.Select the "Display Mode Select"/"Disp Mode Select" display.4 Enter Display Control modePress the [4] or [¢] button for at least 1 second.5 Switch the displayPress the [4] or [¢] button.Each time the button is pressed the display switches.Information DisplayDemonstration "DEMONSTRATION"Date & Clock "DATE"/"CLOCK"Standby display "ALL OFF"6 Exit Display Control modePress the [MENU] button.Demonstration can be selected when "Display Type A" or "DisplayType C" is selected in (page 32).Switching the Standby DisplaySwitching the Full screen display.1 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.2 Select Display Control modePress the [FM] or [AM] button.Select the "Display Mode Select"/"Disp Mode Select" display.3 Enter Display Control modePress the [4] or [¢] button for at least 1 second.4 Switch the Full screen displayPress the [4] or [¢] button.Each time the button is pressed the display switches.InformationDemonstrationSpectrum Analyzer 1Spectrum Analyzer 2Spectrum Analyzer 3Graphic 1 (KDC-PSW9521)Spectrum Analyzer 4 (KDC-M907/ M9021/ 8021)Graphic 2 (KDC-PSW9521)Spectrum Analyzer 5 (KDC-M907/ M9021/ 8021)Switching Full Screen DisplaySpeaker type DisplayOFF "OFF"For 5 & 4 in. speaker "5/4inch"For 6 & 6x9 in. speaker "6* 9/6 inch"For the OEM speaker "O.E.M."4 Exit Speaker Setting modePress the [Q] button.— 13 —5 Exit Display Control modePress the [MENU] button.Full Screen display can be selected when "Display Type C" isselected in (page 32).