Kenwood KDC-8021 Instruction Manual

Also see for KDC-8021: Service manual

Kenwood KDC-8021 Instruction Manual Manual pdf 41 page image

— 41 —TEL MUTEEXT.CONTP.CONTANT.CONT1234567812345678FRONTNONFADING REARFront left output (White) 14Front right output (Red) 13Non-fading right output (Red)(KDC-PSW9521/ M907/ M9021 only)Rear right output (Red) 11Rear left output (White) 12Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left ( +)Rear Left ( –)Battery wire (Yellow) 6Ignition wire (Red) 7FM/AMantenna input2Antenna Cord (ISO) 3Antenna Conversion Adaptor (ISO–JASO) (Accessory3) 1Wiring harness(Accessory1)5Connect to the terminal that isgrounded when either the telephonerings or during conversation. 24Power control/ Motor antennacontrol wire (Blue/White) 22 Connect either to the power controlterminal when using the optionalpower amplifier, or to the antennacontrol terminal in the vehicle. 26A–7 Pin (Red) 8A–4 Pin (Yellow) 9Connector BFuse(10A)4Connector ATEL mute wire (Brown) 21To connect the KENWOODnavigation system, consult yournavigation manual. 25External amplifier control wire(Pink / Black)0 To "EXT.AMP.CONT." terminal of theamplifier having the external ampcontrol function. 23Non-fading left output (White)(KDC-PSW9521/ M907/ M9021 only) 29To KENWOOD disc changer/DAB control input/KPA-SD100/KPA-HD100/KPA-SS100 16To connect these leads, referto the relevant instructionmanuals. 17Connecting Wires to TerminalsIf no connections aremade, do not let thecable come out fromthe tab. 27To External Display/Steering remote