Kenwood KDC-9023R Instruction Manual

Also see for KDC-9023R: Service manual Service manual

Contents

TEL MUTEEXT.CONTP.CONTANT.CONT1234567812345678FRONTNONFADING REAR AUX IN— 49 —— 49 —Connecting Wires to TerminalsTo KENWOOD disc changer/GSM hands free unit/LX BUS Television/External optional accessoryBattery wire (Yellow) 6Ignition wire (Red) 7FM/AM antenna input 3Antenna Cord (ISO)Antenna Conversion Adaptor (ISO–JASO) (Accessory6) 2To connect these leads, refer tothe relevant instruction manuals.115To connect theKENWOOD navigationsystem, consult yournavigation manual. 22Wiring harness(Accessory1) 16If no connections are made,do not let the wire come outfrom the tab. 18aPower control/ Motor antennacontrol wire (Blue/White) 2017TEL mute wire (Brown)Connect either to the powercontrol terminal when using theoptional power amplifier, or tothe antenna control terminal inthe vehicle. 23Connect to the terminal that isgrounded when either the telephonerings or during conversation. 21A–7 Pin (Red) 8A–4 Pin (Yellow) 9Connector AConnector BFuse (10A) 13See page 50Connector Function GuidePin Numbers forISO Connectors Cable Colour FunctionsExternal PowerConnectorA–4A–5A–6A–7A–8SpeakerConnectorB–1B–2B–3B–4B–5B–6B–7B–8YellowBlue/WhiteOrange/WhiteRedBlackPurplePurple/BlackGrayGray/BlackWhiteWhite/BlackGreenGreen/BlackBatteryPower ControlDimmerIgnition (ACC)Earth (Ground)ConnectionRear Right (+)Rear Right (–)Front Right (+)Front Right (–)Front Left ( +)Front Left ( –)Rear Left ( +)Rear Left ( –)External amplifier control wire(Pink / Black) 25 To "EXT.AMP.CONT." terminal of theamplifier having the external ampcontrol function. 26Rear right output (Red) 4Rear left output (White) 10Front left output (White) 12Front right output (Red) 5Non-fading right output (Red)12Non-fading left output (White)AUX left input (White) 100AUX right input (Red) 101