Kenwood KDC-9023R Instruction Manual

Also see for KDC-9023R: Service manual Service manual

Contents

— 55 —? There’s no Front High Pass Filter and Rear High Pass Filter effect.31✔ The Non-fading preout is being used.☞ There’s no effect in Non-fading preout.? The Touch Sensor Tone doesn’t sound.34✔ The preout jack is being used.☞ The Touch Sensor Tone can’t be output from the preout jack.? Even though Synchronize Clock is ON, the clock can’t be adjusted.35✔ The received RDS station isn’t sending time data.☞ Receive another RDS station.? The Dimmer function doesn’t work. 38-1✔ The Dimmer wire isn’t connected correctly.☞ Check the Dimmer wire connection.? The panel is not hidden even when the power is turned off. 38-3✔ The protection function for preventing fingers or other things fromgetting caught in between the panel and this unit has been activated.☞ Turn off the power again.? Sound is interrupted when Dual Zone System is set to ON.38-4✔ When Dual Zone System is set to ON while the Menu system’s (Alternative Frequency)> (page 43) is set to ON, the sound qualitymay be adversely affected if the internal source is set to the tuner.☞ ---? There are no audio control effects.✔ WOW item on

(page 10) have no effect in rear output.☞ ---Tuner source? Radio reception is poor.39✔ The car antenna is not extended.☞ Pull the antenna out all the way.✔ The antenna control wire is not connected.40☞ Connect the wire correctly, referring to the section on.? The desired frequency can’t be entered with the Direct AccessTuning.41✔ A station that can’t be received is being entered.☞ Enter a station that can be received.✔ You’re trying to enter a frequency with a 0.01 MHz unit.42☞ What can be designated in the FM band is to 0.1 MHz.? It isn't the set Traffic information sound volume. 43✔ The set sound volume is less than the tuner sound volume.☞ If the tuner sound volume is louder than the set sound volume,thetuner sound volume is used.Disc source? "AUX1" is displayed without achieving External disc control mode.50✔ Unsupported disc changer is connected.51☞ Use the disc changer mentioned in the IMPORTANTINFORMATION of the section on (page 3).? The specified disc does not play, but another one plays instead.52✔ The specified CD is quite dirty.☞ Clean the CD.✔ The disc is loaded in a different slot from that specified.54☞ Eject the disc magazine and check the number for the specifieddisc.✔ The disc is severely scratched.55☞ Try another disc instead.? A CD ejects as soon as it is loaded.62✔ The CD is quite dirty.63☞ Clean the CD, referring to the CD cleaning of the section on (page 5).

/ 58

Related manuals for Kenwood KDC-9023R