Kenwood KDC-BT30 Instruction Manual

Also see for KDC-BT40U: Service manual

10 | KDC-BT40U/KDC-BT30Tuner OperationBasic OperationSelecting Tuner sourcePress the [SRC] button.Select the “TUNER” display.Selecting the Receiving BandPress the [BAND] button.Each time you press the button, the receiving bandalternates between the FM1, FM2, FM3 and AM.Selecting the Receiving stationPress the [4] or [¢] button.During reception of stereo stations the “ST”indicator lights up.Selecting the preset channelPress the [1] – [6] button.Traffic informationPress the [ ] button for at least 1 second.Turns ON or OFF the Traffic Information function.When the function is set to ON, “TI” indicator lightsup.If traffic bulletin starts when the function is ON,“TRAFFIC INFO” (“TRAFFIC”) is displayed and trafficinformation is received.Station Preset MemoryPutting a station in the memory.1 Select the frequency to put in the memoryPress the [4] or [¢] button.2 Select the number to put in the memoryPress the [1] – [6] button for at least 2 seconds.⁄• Up to 6 stations with a different band (FM/AM) can bememorized to the [1] – [6] button according to thesetting of “PRESET TYPE” of (page 18).Tuner SettingYou can select following Tuner Setting items.1 Select the TUNER sourcePress the [SRC] button.Select the “TUNER” display.2 Enter Function Setting modePress the [VOL] knob for at least 1 second.“FUNCTION” is displayed.3 Select the function itemTurn the [VOL] knob and press it when thedesired item is displayed.Select “SETTINGS” > Function item.Function item Selectable setting/item“LOCAL SEEK” Only stations whose reception is good are searchedin auto seek tuning. (FM band only)OFF/ON“SEEK MODE” Selects the tuning mode of the radio.AUTO1: Automatic search for a station.AUTO2: Search in order of the stations in the Presetmemory.MANUAL: Normal manual tuning control.“AUTO MEMORY”* Putting stations with good reception in the memoryautomatically.NO/YES“MONO SET” You can reduce the noise when stereo broadcastsare received as monaural. (FM band only)OFF/ON“NEWS SET” Automatically receives news bulletin when it starts.Set the time during which interrupt is to be disabledafter start of another news bulletin.Changing “NEWS 00M” to “NEWS 90M” turns thisfunction ON. If news bulletin starts when thisfunction is ON, “NEWS” is displayed and news isreceived. If “20M” is has been set, reception ofanother news bulletin will not start for 20 minutes.The news bulletin volume is the same level thatwas set for Traffic Information.OFF/00M — 90M“AF SET” When station reception is poor, automaticallyswitches to the station that is broadcasting thesame program over the same RDS network.OFF/ON“RDS REGIONAL”“RDS REG”Sets whether to switch to the station only in thespecific region using the “AF” control.OFF/ON“AUTO TP SEEK”(“ATP SEEK”)When traffic information station reception is poor,automatically searches for a station that can bereceived better.OFF/ON(Factory setting: Underlined)[SRC] [VOL][1] — [6][] / [E][ ][BAND][ ]