Kenwood KDC-BT34U Instruction Manual

Contents

Kenwood KDC-BT34U Instruction Manual Manual pdf 21 page image

19ENGLISH |REMOTE CONTSTEERING WHEELREMOTE INPUTMUTEP. CONTANT CONTWiring connectionFuse (10 A)Antenna terminalLight blue/yellow(Steering remotecontrol wire)To the steering wheelremote control adapterBlue/White(Power controlwire/ Antennacontrol wire)Brown(Mute control wire)To the power controlterminal when using theoptional power amplifier,or to the antenna controlterminal in the vehicle.To connect the Kenwoodnavigation system, consultyour navigation manual.Yellow (A4)Red (Ignition wire)Red (A7)Yellow (Battery wire)Pin Color and functionA4 Yellow : BatteryA5 Blue/White : Power controlA7 Red : Ignition (ACC)A8 Black : Earth (ground) connectionB1 Purple ] : Rear speaker (right)B2 Purple/black [B3 Gray ] : Front speaker (right)B4 Gray/black [B5 White ] : Front speaker (left)B6 White/black [B7 Green ] : Rear speaker (left)B8 Green/black [ISO connectorsConnecting the ISO connectors on some VW/Audi orOpel (Vauxhall) automobilesYou may need to modify the wiring of the supplied wiringharness as illustrated below.UnitVehicleA7 (Red)Ignition wire(Red)A4 (Yellow)Default wiringBattery wire(Yellow)If no connections are made, do not let thewire come out from the tab.Rear/subwoofer output Part list forinstallation(A) Faceplate(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction keyMicrophone input jack ( 8)

/ 21

Related manuals for Kenwood KDC-BT34U