Kenwood KDC-BT365U Instruction Manual

Also see for KDC-BT265U: Instruction manual

Contents

6Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGAUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ;NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ;OFF: Cancels.NEWS SET (For )ON: The unit will temporarily switch to News Programme if available. ;OFF: Cancels.REGIONAL (For )ON: Switches to another station only in the specific region using the “AF”control. ; OFF: Cancels.AF SET (For )ON: Automatically searches for another station broadcasting the sameprogram in the same Radio Data System network with better receptionwhen the current reception is poor. ; OFF: Cancels.TI ON: Allows the unit to temporarily switch to Traffic Information if available(“TI” lights up). ; OFF: Cancels.PTY SEARCH Select the available Program Type ( 7), then, press S / T to start.RADIOSearch for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press / on RC-406) toselect FM1/ FM2/ FM3/ AM.3 Press S / T (or press S / on RC-406) to search for astation.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (orpress one of the number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct Access Tuningis automatically canceled.JS_KWD_KDC_BT365U_KN_EN_3.indd 6 9/7/2015 12:00:43 PM