Kenwood KDC-BT39DAB Instruction Manual

Also see for KDC-BT39DAB: Instruction manual

ENGLISH 15BLUETOOTH®Bluetooth test modeYou can check the connectivity of the supportedprofile between the Bluetooth device and theunit.• Make sure there is no Bluetooth device paired.1 Press and hold .“PLEASE PAIR YOUR PHONE PIN 0000”appears.2 Search and select this unit model name(KDC-BT3*DAB) on the Bluetooth device.3 Operate the Bluetooth device to confirmpairing.“TESTING” flashes on the display.The connectivity result (OK or NG) appears afterthe test.PAIRING: Pairing statusHF CNT: Hands-Free Profile (HFP) compatibilityAUD CNT: Advanced Audio Distribution Profile(A2DP) compatibilityPB DL: Phonebook Access profile (PBAP)compatibilityTo cancel test mode, press and hold toturn off the unit.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to make a selection (see the following table), then press the knob.3 Repeat step 2 until the desired item is selected/activated or follow the instructions statedon the selected item.4 Press and hold to exit.To return to the previous setting item, press .Default: XXBT MODEPHONE SELECT Selects the phone or audio device to connect or disconnect.“*” appears in front of the device name when connected.• You can only connect another Bluetooth device by disconnecting the connected Bluetooth devicefirst.“*” disappears when disconnected.AUDIO SELECTDEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the knob.2 Turn the volume knob to select [YES] or [NO], then press the knob.PIN CODE EDIT(0000)Changes the PIN code (up to 6 digits).1 Turn the volume knob to select a number.2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the PIN code.3 Press the volume knob to confirm.RECONNECT ON: The unit automatically reconnect when the last connected Bluetooth device is within range. ;OFF: Cancels.AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/ Android device)when it is connected through USB input terminal. Depending on the operating system of theconnected device, this function may not work. ; OFF: Cancels.INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;NO: Cancels.