Kenwood KDC-BT43U Instruction Manual

Also see for KDC-BT33U: Manual Instruction manual

Contents

Kenwood KDC-BT43U Instruction Manual Manual pdf 7 page image

5ENGLISH |RADIOSearch for a station1 Press L SRC to select TUNER.2 Press repeatedly (or press *AM– / #FM+ on RC-406) to select FM1/FM2/ FM3/ MW/ LW.3 Press 4 / ¢ (or press 4 / ¢ (+) on RC-406) to search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6) (orpress one of the number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406) (for KDC-BT43U )1 Press *AM– / #FM+ to select a band.2 Press DIRECT to enter Direct Access Tuning.“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.3 Press the number buttons to enter a frequency.4 Press 4 / ¢ (+) to search for a frequency.• To cancel, press .• If no operation is done for 10 seconds after step 3, Direct Access Tuning isautomatically canceled.Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SETTINGS], then press the knob.3 Turn the volume knob to make a selection (see the following table), thenpress the knob.4 Press and hold to exit.Default: XXLOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels.SEEK MODE Selects the tuning method for the 4 / ¢ buttons.AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset station. ;MANUAL: Manually search for a station.AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.(Selectable only if [NORM] is selected for [PRESET TYPE].) (➜ 4)MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.PTY SEARCH Selects the available Program Type (see below), then, press 4 / ¢ to start.Press the volume knob to enter PTY language selection. Turn the volume knob to selectthe PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.TI ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.NEWS SET 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF: Cancels.AF SET ON: Automatically searches for another station broadcasting the same program in thesame Radio Data System network with better reception when the current reception ispoor. ; OFF: Cancels.REGIONAL ON: Switches to another station only in the specific region using the “AF” control. ;OFF: Cancels.AUTO TP SEEK/ATP SEEKON: Automatically searches for a station with better reception when the trafficinformation’s reception is poor. ; OFF: Cancels.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Data System station time. ; OFF: Cancels.TUNER SET: Selectable only when the source is not TUNER.TI/ NEWS SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK: (For details, refer to the table above.)• [LOCAL SEEK]/ [MONO SET]/ [PTY SEARCH]/ [TI]/ [NEWS SET]/ [AF SET]/ [REGIONAL]/[AUTO TP SEEK]/ [ATP SEEK] is selectable only when the source is FM.• Available Program Type:SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE,VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL,LEISURE, DOCUMENTMUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHERM (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] ifselected.• If the volume is adjusted during reception of traffic information, alarm or news bulletin,the adjusted volume is memorized automatically. It will be applied the next time trafficinformation, alarm or news bulletin function is turned on.