Kenwood KDC-BT555U Instruction Manual

Also see for KDC-BT355U: Instruction manual Instruction manual

Contents

4GETTING STARTEDCancel the demonstrationWhen you turn on the power (or after you reset the unit), the displayshows: “CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”1 Press the volume knob.[YES] is selected for the initial setup.2 Press the volume knob again.“DEMO OFF” appears.Set the clock1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [SETTINGS], then press the knob.3 Turn the volume knob to select [CLOCK], then press the knob.4 Turn the volume knob to select [CLOCK ADJUST]/ [CLOCK ADJ], thenpress the knob.5 Turn the volume knob to adjust the hour, then press the knob.6 Turn the volume knob to adjust the minute, then press the knob.Press 4 / ¢ to move between the hour and minute adjustment.7 Press and hold to exit.(or)Press and hold SCRL DISP to enter clock adjustment modedirectly while in clock display screen.Then, perform steps 5 and 6 above to set the clock.12Set the initial settings1 Press SRC to enter [STANDBY].2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select [INITIAL SET], then press the knob.4 Turn the volume knob to make a selection (see the following table), thenpress the knob.5 Press and hold to exit.• To return to the previous hierarchy, press .Default: XXPRESET TYPE NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/FM2/ FM3/ AM). ; MIX: Memorizes one station or SiriusXM channel for each presetbutton regardless of the selected band or SiriusXM channel.KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.PANDORA SRC KDC-X597 / KDC-BT555U:ON: Enables PANDORA in source selection. ; OFF: Disables. (➜ 8)BUILT-IN AUX/BUILTIN AUXON: Enables AUX in source selection. ; OFF: Disables. (➜ 7)CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to playas a music CD. No sound can be heard if an audio file disc is played.SWITCH PRE KDC-BT355U:REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to theline out terminals on the rear (through an external amplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.F/W UPDATEF/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, see: www.kenwood.com/cs/ce/3