Kenwood KDC-BT555U Instruction Manual

Also see for KDC-BT355U: Instruction manual Instruction manual

Contents

CAUTIONUse of controls or adjustments or performance of procedures other than those specifiedherein may result in hazardous radiation exposure.In compliance with Federal Regulations, following are reproductions of labels on, orinside the product relating to laser product safety.JVC KENWOOD Corporation2967-3, ISHIKAWA-MACHI,HACHIOJI-SHI, TOKYO, JAPANTHIS PRODUCT COMPLIES WITH DHHS RULES 21CFRSUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.Location : Top PlateFCC WARNINGThis equipment may generate or use radio frequency energy. Changes or modificationsto this equipment may cause harmful interference unless the modifications are expresslyapproved in the instruction manual. The user could lose the authority to operate thisequipment if an unauthorized change or modification is made.FCC NOTEThis equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment may cause harmful interference to radio communications, if it is notinstalled and used in accordance with the instructions. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by oneor more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.• Consult the dealer or an experienced radio/TV technician for help.• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has beendesigned to connect specifically to iPod, or iPhone, respectively, and has been certifiedby the developer to meet Apple performance standards. Apple is not responsible forthe operation of this device or its compliance with safety and regulatory standards.Please note that the use of this accessory with iPod or iPhone may affect wirelessperformance.• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc.,registered in the U.S. and other countries.• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registeredtrademarks of Pandora Media, Inc., used with permission.• Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. Allrights reserved.• The “AAC” logo is a trademark of Dolby Laboratories.• Android is trademark of Google Inc.• The Bluetooth® word mark and logos are registered trademarks owned by BluetoothSIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license.Other trademarks and trade names are those of their respective owners.Información acerca de la eliminación de equipos eléctricos y electrónicosal final de la vida útil (aplicable a los países que hayan adoptado sistemasindependientes de recogida de residuos)Los productos con el símbolo de un contenedor con ruedastachado no podrán ser desechados como residuos domésticos. Losequipos eléctricos y electrónicos al final de la vida útil, deberánser reciclados en instalaciones que puedan dar el tratamientoadecuado a estos productos y a sus subproductos residualescorrespondientes. Póngase en contacto con su administración localpara obtener información sobre el punto de recogida más cercano.Un tratamiento correcto del reciclaje y la eliminación de residuosayuda a conservar los recursos y evita al mismo tiempo efectosperjudiciales en la salud y el medio ambiente.Para cumplimiento de la COFETEL:“La operación de este equipo está sujeta a las siguientes dos condiciones:(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la quepueda causar su operación no deseada”IC (Industry Canada) NoticeThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) This device may not cause interference, and(2) this device must accept any interference, including interference that may causeundesired operation of the device.The term “IC: ” before the certification/ registration number only signifies that theIndustry Canada technical specification were met.Note de IC (Industrie Canada)Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareilsradio exempts de licence.L’exploitation est autorisée aux deux conditions suivantes:(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même sile brouillage est susceptible d’en compromettre le fonctionnement.L’expression “IC:” avant le numéro d’homologation/ enregistrement signifie seulementque les specifications techniques d’Industrie Canada ont été respectées.CAUTIONThis equipment complies with FCC/IC radiation exposure limits set forth for anuncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines inSupplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. Thisequipment has very low levels of RF energy that it deemed to comply without maximumpermissive exposure evaluation (MPE). But it is desirable that it should be installed andoperated keeping the radiator at least 20cm or more away from person’s body (excludingextremities: hands, wrists, feet and ankles). Under Industry Canada regulations, this radiotransmitter may only operate using an antenna of a type and maximum (or lesser) gainapproved for the transmitter by Industry Canada. To reduce potential radio interferenceto other users, the antenna type and its gain should be so chosen that the equivalentisotropically radiated power (e.i.r.p.) is not more than that necessary for successfulcommunication.ATTENTIONCet équipement est conforme aux limites d’exposition aux rayonnements énoncéespour un environnement non contrôlé et respecte les règles d’exposition aux fréquencesradioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible quiest considérée conforme sans évaluation de l’exposition maximale autorisée. Cependant,cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entrele dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignets, piedset chevilles). Conformément à la réglementation d’Industrie Canada, le présent émetteurradio peut fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur)approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques debrouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le typed’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) nedépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.• Contains Bluetooth Module FCC ID: XQN-BTR60X• Contains Bluetooth Module IC: 9688A-BTR601

/ 62

Related manuals for Kenwood KDC-BT355U