Kenwood KDC-BT610U Instruction Manual

Contents

ENGLISH 15BLUETOOTH®PHONE BOOK (Applicable only if the phone supports PBAP.)1 Turn the volume knob quickly to enter alphabet search mode (if thephonebook contains many contacts).The first menu (ABCDEFGHIJK) appears.• To go to the other menu (LMNOPQRSTUV or WXYZ1*), press J / K.• To select the desired first letter, turn the volume knob or press S / T,then press the knob.Select “1” to search with numbers and select “*” to search with symbols.2 Turn the volume knob to select a name, then press the knob.3 Turn the volume knob to select a phone number, then press the knob to call.• The phonebook of the connected phone is automatically transferred to the unitwhen pairing.• Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL or HM(home), OF (office), MO (mobile), OT (other), GE (general)• This unit can display only non-accent letters. (Accent letters such as “Ú” isshown as “U”.)NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the phone number.3 Press the volume knob to call.(or using the remote control)1 Press the number buttons (0 to 9) to enter the phone number.2 Press to call.VOICE Speak the name of the contact you want to call or the voice command to controlthe phone functions. ( Make a call using voice recognition)BATT LOW/MID/FULL*: Shows the strength of the battery.NO SIGNAL/LOW/MID/MAX*: Shows the strength of the current received signal.* Functionality depends on the type of the phone used.Make a call using voice recognition1 Press and hold to activate the voice recognition of theconnected phone.2 Speak the name of the contact you want to call or the voicecommand to control the phone functions.• Supported Voice Recognition features vary for each phone.Refer to the instruction manual of the connected phone fordetails.• This unit also supports the intelligent personal assistantfunction of iPhone.Settings in memoryStore a contact in memoryYou can store up to 6 contacts into the number buttons(1 to 6).1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK],or [NUMBER DIAL], then press the knob.3 Turn the volume knob to select a contact or enter a phonenumber.If a contact is selected, press the volume knob to show thephone number.4 Press and hold one of the number buttons (1 to 6).“STORED” appears when the contact is stored.To erase a contact from the preset memory, select [NUMBER DIAL]in step 2 and store a blank number.Make a call from memory1 Press to enter Bluetooth mode.2 Press one of the number buttons (1 to 6).3 Press the volume knob to call.“NO MEMORY” appears if there is no contacts stored.