Kenwood KDC-BT610U Instruction Manual

Contents

ENGLISH 5DISPLAYEASY MENU (For )When entering [FUNCTION]...ON: ZONE 1 illumination changes to white color. ;OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 22)• ZONE 2 illumination changes to white color when you enter [FUNCTION],irregardless of the [EASY MENU] setting.• Refer to the illustration on page 22 for ZONE identification.TUNER SETTINGPRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/AM/SW1/SW2). ; MIX: Memorizes one station for each preset button,regardless of the selected band.SYSTEMKEY BEEP* ON: Activates the keypress tone. ; OFF: Deactivates.TDF ALARM* ON: Activates the alarm if you forget to detach the faceplate when ACC is set to OFF. ;OFF: Deactivates.SOURCE SELECTPANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10)BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 7)CD READ 1: Automatically distinguishes between audio file disc and music CD. ;2: Forces to play as a music CD. No sound can be heard if an audio file disc is played.F/W UPDATEUPDATE SYSTEMF/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).For details on how to update the firmware, visit .FACTORY RESET YES: Resets the settings to default (except the stored station). ; NO: Cancels.* Not applicable if 3-way crossover is selected.CLOCKCLOCK DISPLAY ON: The clock time is shown on the display even when theunit is turned off. ; OFF: Cancels.ENGLISH Select the display language for [FUNCTION] menu and musicinformation if applicable.By default, [ENGLISH] is selected.TURKCEChange the crossover type1 Press repeatedly to enter STANDBY.2 Press and hold number buttons 4 and 5 to enter crossoverselect.The current crossover type appears.3 Turn the volume knob to select “2WAY” or “3WAY”, thenpress the knob.4 Turn the volume knob to select “YES” or “NO”, then pressthe knob.The selected crossover type appears.• To cancel, press and hold .• To adjust the selected crossover settings, ( 19, 20).CautionSelect a crossover type according to how the speakers areconnected. ( 31)If you select a wrong type:• The speakers may damage.• The output sound level may be extremely high or low.GETTING STARTED