English | 153 Select the nameOperation type OperationMove to the next phonenumber.Turn the [VOL] knob.Move to the next name. Press the [4] or [¢] button.4 Make a callPress the [VOL] knob.⁄• To use the Phone Book, it must be downloaded to thisunit in advance. Refer to Book> (page 24).• During search, a non-accent character such as “u” issearched for instead of an accent character such as “ü”.Calling a Number in the Call Log1 Select the call log modeFor how to select dialing method, refer to a Call> (page 14).Select the “OUT-CALL” (outgoing call), “IN-CALL”(incoming call), or “MISSED CALLS” (missed call)display.2 Select a name or phone numberTurn the [VOL] knob.3 Make a callPress the [VOL] knob.⁄• The outgoing call list and the incoming call list, and themissed call list are the lists of calls originated from andreceived at this unit. They are not the ones stored in thecell-phone memory.Dial a Number1 Select the number dial modeFor how to select dialing method, refer to a Call> (page 14).Select the “NUMBER DIAL” display.2 Enter a phone numberOperation type OperationSelect the numbers. Turn the [VOL] knob.Move to the next digit. Press the [¢] button.Delete the last digit. Press the [4] button.• Press the number ([1] – [0]), #([FM]), *([AM]), or+([¢]) button on the remote controller.3 Make a call• Press the [VOL] knob.• Press the [OK] button on the remotecontroller.⁄• You can input max 25 digits.Make a Voice Dialing Call1 Enter voice recognition modeKDC-BT645U: Press the [VOICE] button.KDC-HD545U:Press the [VOL] knob for at least 1 second, andthen press the [BAND] button.“V-RECG READY” is displayed.2 Press the [VOL] knob.“PB NAME” is displayed.When a beep is heard, say the name within 2seconds.3 “PN TYPE” is displayed.When a beep is heard, say the category namewithin 2 seconds.4 Make a callPress the [VOL] knob.Move to the next phone numberTurn the [VOL] knob.⁄• If your voice cannot be recognized, a message isdisplayed. Pressing the [VOL] knob allows you to retryvoice input. (page 39)• Both the name and category require registration of avoice tag. (page 26)• Audio sound is not output during voice recognition.Registering to the Preset Dial Number(Preset Memory)1 Enter the phone number you wish to registerEnter the phone number with reference to thefollowing:Dial a number/ Calling a number in the call log/Calling a number in the Phone Book2 Select the number to put in the memoryPress the [1] – [6] button for at least 2 seconds.
